PCS40-16, Cold Shrink EPDM Tube For 250-400 kcmil Cable

Coax connector sealing kit. Cold shrink tube for 1/2" to 1-1/4" or 1-5/8" splice. Cold shrink tube for 5/8" to 1-1/4" or 1-5 Specifications

Coax connector sealing kit. Cold shrink tube for 1/2" to 1-1/4" or 1-5/8" splice. Cold shrink tube for 5/8" to 1-1/4" or 1-5/8

Item No.	CST-31
Description.	Cold shrink coax connector sealing kit, cold shrink tubing.
Size.	For 1/2" to 1-1/4" &1-5/8" splice,                                           For 5/8" to 1-1/4" &1-5/8"  splice.
Minimum cable diameter for seal.	13.5mm
Maximum cable or connector diameter can cover.	67.8mm
Note.	A foam tape included for cable built-up.
Relaxed tube length.	325mm

 

Note. This CST-21, have the equivalent function with 3M cold shrink 98-KC31  ( 3M ID.  KE232081346 ). 

 

Description:

 

The CST series provide the correct cold shrink tube or the correct cold shrink tube and special foam to make the installation of coax connector seal easy.The installation does not requrie tooling, and the quality of the installation is less installer dependant.The main application is the sealing of coax connectors used in the wireless communication antenna market.These mainly outside installed connectors require an extra sealing. Up until now, sealing tapes or Heat shrink tubes were used.

 

Technical information:

 

The outer cold shrink tube is made from UV resistant EPDM / Silicone rubber material to provide and excellent seal on the connector. In cases where the different coax cable diameter can not be covered with the tube application range, a special foam is used to increase the smallest cable diameter to fit the shrink performance of the cold shrink tube.

 

1. No (heating) tools needed

2. Safer and quicker installation.

3. Reliable sealing.

4. Easy to remove

5. Wide cable range.

 

Welcome contact us for more details.